Warm White 250 lumens/ft LED Light Strip Outdoor
Which 12V power supply?
For 250 & 650 lm/ft strip: 12W up to 3 ft · 60W up to 16 ft · 150W up to 32 ft
Compare all three
| Powers up to | 12W (1A) | 60W (5A) | 150W (12.5A) |
|---|---|---|---|
| ReefBar & kitchen bar | 2 ft | 12 ft | 32 ft |
| 100 lm/ft strip | 12 ft | 32 ft | 64 ft |
| 250 & 650 lm/ft strip | 3 ft | 16 ft | 32 ft |
Add up everything on one supply and pick the first one that covers it; each runs anything under its max. Over 16 ft of bars or 32 ft of strip in one line? Use a splitter to start a second run.
Couldn't load pickup availability
A waterproof warm white strip for outdoor and wet areas. Our high-output 10mm strip, nearly triple the brightness of our low-power strips.
| Color | Warm white |
|---|---|
| Brightness | 250 lm/ft |
| Output | 12–15 lumens per LED, 4000+ lumens per 16 ft |
| LEDs | 300 per 16 ft strip |
| Power draw | 70–72 watts for a full 16 ft strip |
| Voltage | 12V DC (plug-in power supply sold separately) |
| Width | 10mm |
| Mounting | Full 3M adhesive back: peel and stick to anything |
| Waterproof | Yes, silicone filled for water and shock protection |
Cut it, link it, dim it
Order the exact length you need. Strips can be cut, reconnected and spaced apart, and you can add dimmers and on/off switches. Corner/extender couplings, dimmers and power supplies are in the drop-downs above; details on each are in LED Accessories.
Power: pick a power supply from the chart above. Each one runs anything under its maximum length.
Sealing a waterproof strip
Waterproof strips are silicone filled to protect the LEDs from water along the top and sides. For full long-term protection, run a bead of silicone along both sides of the strip and around every connection, plug and both cut ends. If you skip this, water can eventually short out the LEDs. It runs on 12V, so this is never a safety issue; it just protects your strip long term.
Popular uses
Accent lighting, aquarium lighting, holiday lighting, signage, under-cabinet and under-counter lighting, cove lighting, bar tops, club lights, TV backlighting, task lighting, cabinet and display case lighting, and more. The sky is the limit.
Custom jobs
All of our strips can be customized to do anything you need. Email 21LEDLLC@gmail.com and we'll reply within a few hours with a quote, and help brainstorm ideas if you need it. Or call 817-440-4862.
Why our strips last
1. White board, copper wiring. Most cheap strips are built on a yellow board. Ours sit on a nicer, more durable white board with an oil-brushed surface, and the wire running through it is 100% copper instead of the cheap, short-lived iron most strips use.


2. Two-layer board. In the photo, "A" is our strip: a two-layer board that resists heat and is protected from short circuits. "B" is the thin board common on cheap strips.

3. Real silicone, not epoxy (waterproof strips). Our waterproof strips are filled with real silicone instead of epoxy glue, which turns yellow and fades over time. Real silicone is also the only way to keep the color temperature consistent over the years.

4. Gold-thread chip connection. Each LED is connected to its chip with gold thread rather than copper thread, for a connection that lasts.


